Salta al contenuto principale

Seconda generazione di iPhone. Modello A1241/8 o 16 GB di memoria/plastica posteriore bianca o nera. La riparazione è più semplice rispetto al primo iPhone. Richiede l'uso di cacciaviti e strumenti di leva e distacco con ventose.

1158 Domande Visualizza tutte

Ear peice and proximity sensor not working

I replaced the headphone jack on my iPhone because I was not getting a good connection to various headphones. In putting it back together I must have not connected connector 3 correctly. I have tried a number of times to reconnect it. Does anyone have a photo of what it should look like or any suggestions as to what I may be doing wrong? If not what is my next step?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

5 Risposte

Soluzione Prescelta

Could be your connector? It is hard to notice, but sometimes they break and lift off the board slightly.

http://hectordtruong.blogspot.com/

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento
Risposta Più Utile

Here's a pic (the model in the pic is a 3GS, but the connector is the same in this instance):

Block Image

It has a gold tip that should be completely in the connector. Make sure the locking bar is down once the gold tip is in there.

Have you tried restoring it, or can you not get that far?

If that doesn't fix the problem, it seems that the front panel/digitizer is broken.

If THAT doesn't fix the problem, all signs point to logic board.

Questa risposta è stata utile?

Punteggio 2

1 Commento:

Aggiungi un commento

I Must have knicked the #3 cable while putting it back together. I too purchased a new cable, and although it is not the easiest thing to replace I did do it and now everything works wonderfully.

Questa risposta è stata utile?

Punteggio 2

3 Commenti:

+great! now you can accept your own answer

da

+ (You forgot your tick pollytintop)

da

oops, thought it went on.

da

Aggiungi un commento

Might not be the logic board. That ribbon cable is fickle. I ahd this problem and just bought the cable (proximity sensor cable) off of amazon and replaced it. There's a youtube video on how to do it (since it's not immediately obvious), and it's an easy repair.

Also, remember to always shut off your phone before you open it. Seems that the proximity sensor or the cable may be especially sensitive to that.

Questa risposta è stata utile?

Punteggio 1

1 Commento:

Aggiungi un commento

dam im such an idiot i was trying to lift the white part of the connector and not the black thing and i then chipped abit of the white part but it has not tottally fallen off and the ribbon still fits in there thankfully but i guess its damaged and now i know how to fix it properly

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Scott sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 7,893