IPad Air 2 Replacement Screen Not Working
I replaced my broken iPad Air 2 LCD Screen and Digitizer with a new one.
But when I tried to turn on the device, after the repair, it will not start.
I used an iOpener (heated it in microwave for 30 seconds) and a plastic spudger, and followed the teardown video. I'm not sure where I screwed up. Any help would be great.
Thanks.
Questa è una buona domanda?
1 Commento
I've found out my problem. I tore up the small rectangular piece (on the left side of home button) that is soldered on.
da Phil