Salta al contenuto principale

Lanciato il 25 settembre 2015. Modello A1688/A1633. Si ripara in modo simile alle generazioni precedenti, richiede cacciaviti e strumenti di apertura. Versioni GSM o CDMA /16, 32, 64, 128 GB / Oro rosa, Oro, Argento, Grigio siderale.

2598 Domande Visualizza tutte
Domanda Chiusa

Replaced LCD Assembly, Fingerprint messed up.

Good Evening from Rainy Cali!

I got an iPhone 6, shattered screen, visible LCD, all features working as intended. otherwise. I replaced the LCD Assembly with one from

I gently removed the existing Home Button and Metal Plate-Cable Combo, transferred them to the new LCD Assembly, and reassembled, along with the Cams, etc.

The phone works with two exceptions: both involve a Wonky Fingerprint button.

A) The Fingerprint Sensor does not respond. Fingerprints are not found on the phone, attempting to make new ones instantly goes to "Failed, there was an error enrolling fingerprints."

B) The Home button cannot wake up the phone and bring it to the lock screen, But once unlocked, the home button works for changing between apps, getting the Apple Pay card to come up (but not pay, no fingerprint.)

Anyone heard of this crap before?

PS...I was Using a 24x24 Antistatic Mat, a Wrist Strap, both connected to a Banana Junction, which then runs to the Center Screw of the Electrical Wall Outlet using Size 5 Ring terminals on 12 gauge wire, using the ESD safe Blacksticks, and wearing two black Nitrile Gloves, dressed wearing all cotton dickies shirt, Carhart cotton socks, and Bamboo-toe shoes, while listening to the Lord of the Rings Pandora station - All the Apple service tech requirements were met, to the best of my knowledge. ;)

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0


Is this for 6 or 6S?


Aggiungi un commento

2 Risposte

Soluzione Prescelta

UPDATE: The problem has been solved. The Flex Cable that goes from the Logic Board to the Fingerprint/Home Button was successfully replaced, with minimal fuss, and it solved the problem.

Here's the part that solved it:

That flex cable is SO delicate, it's not even funny.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento
Risposta Più Utile

Was the previous screen cracked around the home button? The reason I ask is that I have had a similar problem a while back and found it to be small shards or glass that where actually in-bedded in the backside of the home button that mates with the backing plate that holds the home button in place . Dont know how I managed it but it did cause the problem and once removed had my joy back . Give it a look and hope this helps

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 139