Salta al contenuto principale

The current line of iPod nanos comprises seven different generations.

1005 Domande Visualizza tutte

Stuck in OK to disconnect mode, can't turn on?

I have an IPOD nano and the screen says OK to disconnect with a check mark. When I disconnect it, it seems frozen in this mode and I can't turn it on,off, nothing.

Any answers?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 11
2 Commenti

I have an IPOD nano and the screen says OK to disconnect with a check mark. When I disconnect it, it seems frozen in this mode and I can't turn it on,off, nothing.

da

Aggiungi un commento

7 Risposte

Soluzione Prescelta

hold down the power and vol down buttons till apple sign appears. Worked for my 6th gen with same issue.

Questa risposta è stata utile?

Punteggio 21

14 Commenti:

Bee Jay, you got it buddy. I did that and my ipod is back , Thanks

da

thanks , it helped

da

how smart can one be??? not curing cancer however making sweet music!!

da

i did that but still doing the samething

da

It worked! Thanks!

da

Mostra altri 9 commenti

Aggiungi un commento

Do a reset. I'm not sure which nano you have, but typically a reset involves sliding the hold switch to hold then back again then pressing the center and menu button simultaneously for 6 to 10 seconds. You may need to repeat this a time or two. Also make sure to be touching only the center and menu buttons, not any other part of the control wheel and push the menu button from only the outer portion of the control wheel, not toward the center. Check out this link to the apple support page where you can select your nano, though the process should be the same:

ZELDA

Questa risposta è stata utile?

Punteggio 15

9 Commenti:

thank you very much... malama pono ... Aloha 'oi From the Islands of HAWAII

da

I was at my wits end trying to solve this major issue. Thanks to your clever advise all is back to normal within minutes. THANK YOU!!!!

da

R Trent.....THANK YOU!! IT WORKED!!

da

It worked Thanks!!

da

tnx it worked

da

Mostra altri 4 commenti

Aggiungi un commento

Press home and power button

Questa risposta è stata utile?

Punteggio 5

6 Commenti:

thank you!!

:) :) :) :) :)

da

Does not work for my I pod 160

da

should you keep the i pod in the hold position

da

thank you it worked

da

It worked but it said I have to connect to Itunes to restore.

da

Mostra 1 altro commento

Aggiungi un commento

I tried the power & reset button option, the apple logo is visible, after which it goes back to "ok to disconnect" . The local repairer says that it is a hard drive issue. Mine is an iPod black

Questa risposta è stata utile?

Punteggio 1

1 Commento:

I connected this to iTunes, but the iPod is not being detected to try a reset. I can hear the hard drive spinning all the while. Any help to resolve this will be much appreciated

da

Aggiungi un commento

Plug your ipod into itunes.

Click on ipod.

Click Restore.

Wait Patiently

Click Sync

All Done!

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Step 1.- connect ur ipad nano to pc or laptop

Step 2.- install itune software to ur pc

Step 3.- select ur device (file ---> add device

Step 4.- click restore

Step 5.- follow the instructions

Step 6 .- solved ur problem.

100% its wrkd.. by FB: bala sam Chennai...

Questa risposta è stata utile?

Punteggio 0

1 Commento:

Can someone help with my I pod problem, there's a tick in the middle of the screen, reading ok to disconnect, just can't get it off that

da

Aggiungi un commento

i have an ipod quite old and it has a message with tick saying ok to disconnect and it won’t charge i have read others with the same problem but it won’t work please help

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Sandy sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 23

Ultimi 30 Giorni: 109

Tutti i Tempi: 75,511