Aggiusta la tua roba Comunità Store

Furby was a popular electronic robotic toy resembling a hamster/owl-like creature which went through a period of being a "must-have" toy following its launch in the holiday season of 1998, with continual sales until 2000. Furbies sold 1.8 million units in 1998, 14 million units in 1999, and altogether in its three years of original production, Furbies sold over 40 million units.

84 Domande Visualizza tutte

Opzioni

My Furby is not moving much and goes sleeping after 1 minute

My daughter's Furby just started to make this cracking noise with every word it says. Also the Furby's moving very quietly and not moving back and forward (at all).

Usually when the Furby goes to sleep, it will bend forward. Also the its ears (SOMETIMES) are not moving forward when going to sleep.

When the Furby is awake, it will last like 1 minute and its eyes will light off (and will go to sleep). It will only wake up if I shake it well.

I also noticed that will not react fast/properly when touching him.

The reset (or the change of personality modus which ONLY WENT GO 1 TIME)won't help.

I kindly ask for help. I speak also NL, ES and IT.

Thanx!

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 2
Aggiungi un commento

3 Risposte

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

Block Image

My furby keeps falling asleep

Questa risposta è stata utile?

Sì No
Punteggio 0

1 Commento:

There might be a loose wire. Also check the batteries. In the image that I linked there is a diagram that shows where the reset is located on your furby model.

https://static.wikia.nocookie.net/offici...

da

Aggiungi un commento

Opzioni

Checking the wire properly.. Some Wire burning and need to replace.. Becareful for replacement.. Very difficult.. Also checking. Dc motor running

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento

Opzioni

The small 6V brushless DC motor went wrong.I’ve had similar issues to this as well. You can replace it with one from a PC DVD reader (the door opener motor). Shaft is smaller but it's ok, diameter is good. You’ll need a soldering gun.

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Ciro Morante sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 10

Tutti i Tempi: 1,363