Salta al contenuto principale

Introdotto il 19 settembre 2014, questo iPhone con schermo da 4,7" è la versione più piccola dell'iPhone 6 Plus. Identificato dai numeri modello A1549, A1586, and A1589.

4994 Domande Visualizza tutte

iPhone 6 Bent housing no signal/service

iPhone 6 housing bent and motherboard bent towards the bottom of the phone and motherboard, everything works except that it will not get any signal/ cell service. It works on wifi, but on the top where it usually says the carrier it keeps saying searching, even after I pull the SIM card out it keeps saying searching. No bents anywhere near the SIM card reader. Tried a different sim tray, network reset, opened the phone and checked all the connectors and components. I haven't done a restore on the phone. I believe it mind be hardware related because it happened when the phone got badly bent. Any suggestions on things to try or how I can fix the problem. Thank you

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 3
Aggiungi un commento

2 Risposte

Risposta Più Utile

Reflow the entire cellular section, reball the cellular chips if necessary.

Questa risposta è stata utile?

Punteggio 2
Aggiungi un commento

What does reflow and reball mean?

Questa risposta è stata utile?

Punteggio 1

1 Commento:

Reballing is a method of soldering which requires balls to be placed underneath the chip. The process requires a de-solder and a fully equipped solder station. You have to desolder the cellular chip with a de-solder station and resolder it. Trust me it's a nightmare. You're gonna want to take it to a specialist or get a new phone.

da

Aggiungi un commento

Aggiungi la tua risposta

Dewells sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 3,963