Aggiusta la tua roba Comunità Store

13" aluminum unibody, 2.0 or 2.4 GHz Core 2 Duo processor.

574 Domande Visualizza tutte

Opzioni

Can I reattach parts that sort of came of while repairing?

OK hi,

I tried the Fan Step By Step Guide and I kind of did all right, but when it came to the point where I had to disconnect the cables from the logic board a problem occured and i sort of took the whole thing off. So now i cant reattach the cables to the logic board because the mounting came off as well. Now I’m looking for help rather with soldering or anything that could help.

Thanks a lot

Leo

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio -1
Aggiungi un commento

2 Risposte

Filtra per:
Più utili Più recenti Più Vecchio
Soluzione Prescelta

Opzioni

With a small soldering iron and a steady hand you can try your luck and resolder the socket. Magnifier helps. Otherwise the alternative is a new logicboard :-(

BTW. you pull the connector straight up, a point that should be mentioned more clearly in the guide. A lot of people had these troubles.

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento

Opzioni

An electronics shop

might be a better solution than a DIY fix. The electronics shop should have all the equipment and skill to directly solder the wires to the board.

If this answer was helpful please remember to mark it accepted.

Good Luck,

N

Questa risposta è stata utile?

Sì No
Punteggio 0

1 Commento:

Soldering logic board components requires special tools, and lots & lots of practice. It's very easy to damage the circuit board if you've not had lots of experience.

da

Aggiungi un commento

Aggiungi la tua risposta

leo sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 682