Aggiusta la tua roba Comunità Store

Modello metà 2010, A1278 / processore Core Duo 2,4 o 2,66 GHz

794 Domande Visualizza tutte
Domanda Chiusa

Opzioni

Fan spinning without stopping and not detecting any hard drives

Hello, so I decided to clean and change the thermal paste on my macbook pro, and after the deed, I put it all back together. Now, when it starts, the fan spins at maximum capacity all the time, and my hard drive isn't detected. I've launched ASD and it tells me the only problem with it is the fan motor, since it can't regulate it, but other than that every sensor is in good shape. Thanks for any help you could give me, it's probably a really dumb solution, but it's the first time I've done this !

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
1 Commento

Why did you replace the thermal paste? Were you getting a lot of beachballs?

da

Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

Review the IFIXIT guide: MacBook Pro 13" Unibody Mid 2010 Fan Replacement Step 4 (all three images) compare your connectors are they damaged?

Questa risposta è stata utile?

Sì No
Punteggio 1

3 Commenti:

I've looked and I can't find anything wrong with them, everything looks fine !

da

Then you have a deeper problem here than just the fan. I would suspect you'll need to take the system appear again and review the IFIXIT guide steps to locate what you did wrong. Here's the IFIXIT guide you should review: MacBook Pro 13" Unibody Mid 2010 Logic Board Replacement

da

But what should I review? I don't think I did anything wrong, but just in case, if I put thermal paste but chose to use the heatsink to spread it and not do it myself, could it pose a problem?

da

Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 52