Guidance requested for installing Camera & Sensor Cable Shield Sticker

Question

iPhone 5s

L'Apple iPhone 5s è stato presentato il 10 settembre 2013. La riparazione di questo dispositivo è simile a quella dei modelli precedenti e richiede cacciaviti e strumenti di apertura. Disponibile nelle versioni GSM o CDMA con capacità di 16 , 32 o 64 GB nei colori Argento, Oro e Grigio Siderale.

3531 Domande Visualizza tutte

Domanda Chiusa

ellamama @ellamama

Rep: 57

5

3

Postato: 21 dic 2015

Opzioni

Guidance requested for installing Camera & Sensor Cable Shield Sticker

After my first "fail" in repairing an iPhone, I'm starting over, with new parts. In addition to a new front panel (I tore a cable on the "old" new front panel), I also ordered a new Camera and Sensor Cable Shield Sticker to replace the original one which looked pretty worn out after having been removed and replaced at least twice.

After reviewing assorted how-to guides, I've yet to find one which details how to go about replacing this part. I'm planning on just figuring it out as I go along, but I'd sincerely appreciate it if others would share their experience/advice. (I'm really hoping to avoid future problems with this project!)

Thanks in advance for sharing your knowledge.

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

1 Commento

Thanks @WiN6MaN. After debating the risk of damaging the ribbon vs. the need for the sticker in the first place, I opted to stick (no pun intended) with the original Cu sticker. Hopefully I won't regret this decision.

21 dic 2015 da ellamama

Aggiungi un commento

1 Risposta

Soluzione Prescelta

WiN6MaN @win6man

Rep: 73

2

Postato: 21 dic 2015

Opzioni

It sticks right behind the camera itself, you need to separate the camera and the ribbon a little. But be careful to not separate it to much or you'll break the ribbon.

Honestly tough this sticker is not crucial and even if it's not there the camera/light sensor will work just fine.

I think it serves as a ground to avoid or lessen screen static.

Questa risposta è stata utile?

Sì No

Punteggio 0

Aggiungi un commento

Thanks @WiN6MaN. After debating the risk of damaging the ribbon vs. the need for the sticker in the first place, I opted to stick (no pun intended) with the original Cu sticker. Hopefully I won't regret this decision. — ellamama