Aggiusta la tua roba Comunità Store

Modello A1502 con processore Intel dual core da 2,4, 2,6 o 2,8 GHz. Sul mercato dall'ottobre 2013.

552 Domande Visualizza tutte
Domanda Chiusa

Opzioni

Screen Backlight behaving strangely after minor soda spill?

I spilled soda on my macbook pro 13" late 2013. The screen backlight started to acts nuts, It decides to turn on and off by itself. Most often, however, it is not working- But when it turns on, it stays on until I close the lid or restart the device. I have no Idea how to fix it myself. Also, in my country no one is using or fixing Macs, so can't get some one to fix it.

What do you think the issue is knowing that its been 5 months and no improvement.

P.S. Apple says you need everything new inside the macbook pro(That when I was abroad ). The repair price is close to a brand new one. I have been using it connected to a monitor for the the time the screen backlight is off and when it gets resurrected I use it as normal laptop with a shiny retina screen.

Block Image

Block Image

Block Image

Block Image

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
2 Commenti

I just received a new logic board from iFixit, and I installed it on the the macbook. Everything works fine now, thank you iFixit.

da

AWESOME! Good job.

da

Aggiungi un commento

4 Risposte

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

Hi there, Sounds like the backlight has been damaged. It is located under the keyboard and can be replaced with out having to remove the keyboard. It is quite a technical repair though requiring you to remove the motherboard. The part is not to expensive to buy, just requires a bit of computer dismantling knowledge.

Good Luck

Questa risposta è stata utile?

Sì No
Punteggio 1

1 Commento:

My issue is the screen backlight not the keyboard. If you got it right, what exactly does it look like in order to change it and get the screen lights to work.

da

Aggiungi un commento

Opzioni

Have you tried disassembling it, drying it out, and cleaning up the dried soda/syrup? I'm thinking the culprit might be an intermittent short occurring.

Questa risposta è stata utile?

Sì No
Punteggio 0

1 Commento:

Yes, I have cleaned and dryed the liquid.

da

Aggiungi un commento

Opzioni

Post some pics of the board and by the lcd connector too.

Questa risposta è stata utile?

Sì No
Punteggio 0

2 Commenti:

Will be posting picture shortly

da

Posted above

da

Aggiungi un commento

Opzioni

Block Image

I think there's corrosion on the lcd board you will need to remove the clutch cover to expose it.

Questa risposta è stata utile?

Sì No
Punteggio 0

2 Commenti:

I did that already and its clear.

da

Just replace the lcd flex cable then

da

Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 139