Kenmore elite washing Machine Code error CL, control locked?

Mike, this error code most likely indicates that the CONTROL LOCK has been activated. To deactivate the control lock press and hold the drain and spin button for 5 seconds. Or you can try to reset it by unplugging your machine, and plug it back in after 5-10 min.

Questa risposta è stata utile?

Sì No

Punteggio 3

Commenti:

Thanks dude...

22/10/2015 da Mike

For the kenmore elite the Cl error was cleared by the stay fresh button. It also says control lock above it

02/07/2018 da LuisS

On some models, the control lock is also the chime button. Press and hold that for 5 seconds, and you're good as new.

14/01/2019 da lrc1978765

On my model, Accela-wash, press and hold the extra rinse button which also has control lock on it

29/01/2019 da mapibd

Holding the chime button for 5 seconds worked for me! Thank you! :)

05/02/2019 da Drew Coleman

Mostra altri 2 commenti

Aggiungi un commento

For the kenmore elite the Cl error was cleared by the stay fresh button. It also says control lock above it — LuisS
On some models, the control lock is also the chime button. Press and hold that for 5 seconds, and you're good as new. — lrc1978765
On my model, Accela-wash, press and hold the extra rinse button which also has control lock on it — mapibd
Holding the chime button for 5 seconds worked for me! Thank you! :) — Drew Coleman