Salta al contenuto principale

Tutto quello che ti serve per riparare stesso il tuo iPhone! Dal nuovissimo iPhone 15, fino all'iPhone 2G originale del 2007, iFixit offre guide di riparazione gratuite e informazioni sullo smontaggio per ciascun modello di iPhone, oltre a fornire le migliori parti di ricambio, strumenti e consigli della galassia.

36389 Domande Visualizza tutte
Domanda Chiusa

Adhesive goes inside the lcd

Hi guys, i fix phones for living

Well, whenever I replace the glass on iPhone LCD, loca goes between the screen and back light and it always indicate obviously glue underneath,

So I remove the back light and put a faulty light on temporary bases, and after sticking the glass just solder them back together but it make me annoying sometime cleaning and soldering again Nd again,

Can any give me solution for that please

Regards

Aqi

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Soluzione Prescelta

The solution is called "OCA".

Do not confuse it with "LOCA"!

While LOCA is a Liquid adhesive, OCA is like a sticker.

You will need one to two machines to attach it, but its worth the money.

Just look at YouTube for "iPhone OCA" and you will get the rest.

Questa risposta è stata utile?

Punteggio 0

2 Commenti:

I know bout OCA in which you need autoclave for removing bubbles but it's not studying me as when you drop your phone with OCA adhesive on LCD , there are changes you brake the screen quickly, or when it's already changed the glass with OCA and you break the glass again, hard to remove the OCA again.

That's why I like LOCA. You can put as much shock absorbing in that as much you can't do with OCA

da

You can also use some "tricks" to stop running LOCA between LCD and backlight:

First trick is:

Silcer Conductive Paste, as seen on this youtube-video:

watch?v=4DXHbPMoXG8

Second trick ist:

Use some "dough" (like play-doh) to seal the gap between backlight and LCD, then use LOCA and after curing under UV-Light, remove the play-doh (dough).

You could also use some sticky tape to seal the gap between LCD and Backligh to prevent LOCA running in between...

da

Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,085