Salta al contenuto principale

Guide per la versione Wi-Fi dell'iPad Mini 2. Annunciato il 22 ottobre e introdotto il 12 novembre 2013. L'iPad mini 2, noto anche come iPad mini con Retina Display, ha tutti i pixel dell'iPad Air in un più piccolo fattore di forma da 7,9"

220 Domande Visualizza tutte

Missing solder pad on Touch screen connector iPad mini 2

Hi guys,

We have a problem.

A customer brought an iPad 2 mini. I disassembled ipad, and I realized the touch screen connector was damaged. I removed the connector with solder iron, but one of the solder pad are missing.

what is the solution ?

thanks

Tibor

picture:

Block Image

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

3 Risposte

Soluzione Prescelta

This is all wrong !!! The missing pad is 5th pad !! 5 NC - no connection !!

Block Image

Yellow selection is pad 6,

Block Image

oldturkey :D

Questa risposta è stata utile?

Punteggio 2

7 Commenti:

@fixlab excellent job in finding this. Amazingly enough it took a year for somebody to catch this error. I did correct the original answer.

da

No problem ;)

da

@fixlab I have the same problem. The pads number 5, 15, and 17 are missing. Colud you help me with the schematic picture? Where could I connect the missing pads? Thanks!

da

gabor, pin 5 is nc, pin 15 is ground and 17 you can connect to the large cap to the left side of the connector. on the right side of the cap

da

Thank you daniel!

da

Mostra altri 2 commenti

Aggiungi un commento
Risposta Più Utile

Iphoneszerviz Szeged, correction. That is contact #5 of J1700. It does not need anything. NC no connection

Block Image

Questa risposta è stata utile?

Punteggio 6

6 Commenti:

Very useful, Thank you!

da

By placing a jumper from the cable to the board?

da

thank you old turkey, :)

da

@oldturkey03 extremely grateful!

da

@iphoneszerviz, did you manage to repair this? Can u post a pic or explain a little what you had to do exactly? We are facing a similar prblem ourselves with the exact same pad ripped off during a connector replacement

da

Mostra 1 altro commento

Aggiungi un commento

Iphoneszerviz Szeged,

try to use best or recommended rework tools when you touching high tech logic boards. Here i can see one path Path damaged on your logic board.

you have two options,

1) Change the new logic board

2) Path modification : check the path destination and you may have to connect them physically

All the best!

Questa risposta è stata utile?

Punteggio 2

3 Commenti:

circuity diagram available this iPad?

da

creativeelectron (http://creativeelectron.com/) seeking your support to find path of 8th contact - TP

da

jessabethany, seeking your support as well

da

Aggiungi un commento

Aggiungi la tua risposta

Iphoneszerviz Szeged sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 8

Tutti i Tempi: 4,731