Salta al contenuto principale

Announced October 22nd and released November 12th, 2013. The iPad mini 2, also known as the iPad mini with Retina Display, has all the pixels of the iPad Air in a smaller 7.9" form factor.

426 Domande Visualizza tutte
Domanda Chiusa

Why my ipad screen is responding by iteself, withuout me touching it?

My ipad mini 2 is acting strangely because the screen is constantly moving by itself. i think this is a problem with the digitizer, although I don't think I've dropped it anywhere. I am looking for a solution and how to get it fixed for the best price!

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

2 Risposte

Has it had any previous work done to it before?

Questa risposta è stata utile?

Punteggio 0

2 Commenti:

Nope. It hasn't had any work done to it before.

da

Try putting the iPad into DFU restore mode and restore the iPad. Be sure to back it up first though as this will erase your content. Google DFU iPad for a step by step instruction.

Otherwise it could be compression damage to the digitizer, something wrong in the logic board or even water damage.

da

Aggiungi un commento

Hi Yathavan,

From experience in fixing these iPads my opinion would be that the digitiser on the device is faulty. You could try a DFU restore but the screen probably needs to be replaced. There are many different guides online that show you how to replace the iPads digitiser: iPad 2 Wi-Fi EMC 2415 Front Panel Replacement. If you are uncomfortable replacing your screen then I would recommend taking it into a repairer and getting them to have a look at it. If you have any questions don't hesitate to ask! Best Of Luck!!!

Questa risposta è stata utile?

Punteggio 0

2 Commenti:

Thanks Cam! I hope your answer works. Although do you know how to DFU restore my ipad?

da

Connect iPad to your computer and start iTunes. Turn off the iPad. Press and hold Power Button for 2 seconds, then press and hold Home Button. The two buttons are now pressed simultaneously. Wait 12 seconds, then release only the Power Button. Wait another 15 seconds, then release when you see that iTunes has detected your iPad and it is saying the iPad is in "Restore Mode." The screen should be black on the iPad itself. If it shows "connect to iTunes" it means it is in restore mode, which will work as well. As for your iPad doing ghost touch, did you buy it new or used? If used and had been repaired before, it could be a bad part they used. If still new, could need a new screen as well like Cam Smith said. Or could be something else on the logic board. Beware that any repair on this iPad is not an easy one. The iPad Mini is the trickiest of iPads to repair so far, and only the best quality parts should be used (like those sold by iFixit) in case you decide to go down that road.

da

Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 150