Charger wasnt chg'g #2 of the 5 pins is pushed in. Fixable?
#2 gold pin is pushed in. Can it be pulled back out? Mac isn't charging. I'm assuming this is the problem.
Questa è una buona domanda?
Punteggio
1
255473
2 Risposte
Risposta Più Utile
Rep: 685,3k
3,4k
1,1k
2,6k
Unplug the Mag-Safe adapter then use a wooden tooth pick to push the pins in and see if you can get it to release. The # 2 & 4 pins are the pins voltage is carried through. Heres the pin out: https://en.wikipedia.org/wiki/MagSafe
Questa risposta è stata utile?
Punteggio
2
Rep: 167
4
1
I'm pretty confident that's why it's not charging too. It's easier to just replace the DC-IN board on that model. It's about $15 on eBay for the part and the guide is of course on here. I have attempted to pull pins out, never had any success personally.
Questa risposta è stata utile?
Punteggio
-1
The issue is with the Mag-Safe adapter, not the DC in board.
