Salta al contenuto principale

HMDX Jam HX-P230 is a wireless Bluetooth speaker manufactured and released by the HMDX Company in 2012. Also known as JAM classic portable speaker.

37 Domande Visualizza tutte

How do I bypass charging port?

The charging port is damaged and was wondering if there was any way on bypassing it

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 7
4 Commenti

Where do you find pin 1 and pin 5 on the chargering port

da

What the f*** how can I get this fixed and where

da

Sometimes Radio Shack will fix $@$* like this

da

Could I charge my axess Bluetooth speaker with a itek wireless charger

da

Aggiungi un commento

4 Risposte

Risposta Più Utile

Open the unit and solder pin 1 to negative and pin 5 with positive to a cable or jack... supply it with 5v 1a or 6v 3a max

Questa risposta è stata utile?

Punteggio 3
Aggiungi un commento

Lidia Ascencio, not quite sure what you mean by bypassing. You will need some port in order to charge the battery. I would suggest a charging cable, cut the micro USB end off and solder the wires to the contacts on the port. Of course, if you can find a replacement port, unsolder the old one and replace with a new one. Using this guide you can actual get to the connector.

Questa risposta è stata utile?

Punteggio 2
Aggiungi un commento

I can’t do the microsurgery to replace the actual connector but I found a spot to wire the ground and + wires from a USB cable. Apologies for my terrible soldering my eyesight is even worse then my Radio Shack soldering iron.. There are many places you can ground the connection. I just went for the easy target and soldered the green lead from my cable to the outside shield of the micro USB connector. You could probably also solder to the negative battery input. For the + terminal whuch for my cable is a pink wire I found a small through hole in the circuit board. I shoved a small wire into it and soldered my + lead. I then tested everything and used hot glue to make sure the wires didn’t move and compromise my terrible soldering job.

Block Image

Questa risposta è stata utile?

Punteggio 2
Aggiungi un commento

that is AAAmazing . thanks

btw the world is having a pandemic these days.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Lidia Ascencio sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 18

Ultimi 30 Giorni: 72

Tutti i Tempi: 28,430