Salta al contenuto principale

The Kenmore Elite HE3 is a washing machine by Kenmore.

668 Domande Visualizza tutte

installed a brand new switch

Well I've done it all. Even installed a brand new switch. It worked perfect the first 3 times. The Blankety Blank thing is at it again. We paid 42.00 dollars for a new switch. Now it is doing the same thing. Sometimes I wish we never had to depend on modern convenience then we would not know what we are missing when it all of a sudden won't work. If anyone has an idea let me know?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
1 Commento

My honey checked all the connections at the control panel. Found 1 of them a little loose but pulled each one off and put it back on. It has not quit yet. Gone through at least 8 loads now.

da

Aggiungi un commento

1 Risposta

Soluzione Prescelta

Try this. Remove the top cover of the washer. To remove the top cover, my washer had 3 screws on the back. Once the cover has been removed, you should see the Central Control Unit (CCU). Simply give the far right terminal a little push inwards and that should to the trick. I believe the far right terminal controls the front door latch ( F DL ). If not, give all the terminals to the left a little push. I'm guessing vibration from the washer causes the terminal to shake loose which results in the F DL error code. I hope this helps.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

an angry mom sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 114