Salta al contenuto principale

The Beats Pill is a small, portable Bluetooth speaker from the Beats by Dre line of products produced by Beats Electronics LLC. It features direct audio and Bluetooth connectivity as well as an internal microphone to conduct phone calls. This device is fairly capable of being repaired due to its intuitive construction.

31 Domande Visualizza tutte

Small dent on mesh metal of beats pill 2.0

how can i remove the mesh metal of the speaker to get to the back of it so i can smoothen out the dent

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 6
Aggiungi un commento

8 Risposte

Risposta Più Utile

I have a 2.0 and yes it will slide off, just give it a slight hard pull and it should slide right off.

Questa risposta è stata utile?

Punteggio 3

1 Commento:

How do you put it together will it just clip in? Or does glue need to be used

da

Aggiungi un commento

Follow this guide to see how it’s opened:

Beats Pill 1.0 Motherboard Replacement

Questa risposta è stata utile?

Punteggio 2
Aggiungi un commento

they slide off the side pretty easy. Just pull really hard and it should come off

Questa risposta è stata utile?

Punteggio 1

6 Commenti:

it slides off at the sides just needed to clear that up

da

do i just pull it off its a pill 2.0 not a 1.0 if theres any difference

da

How? i cant do it...

da

i have the 2.0 and it will not slide off please help

da

It won't work for me either not sure what to do now

da

Mostra 1 altro commento

Aggiungi un commento

Dissasemble per all of the vids out there and then gently lift the corners of each speaker grill that are closest to the beats "b" in the center, you may have to go back and forth between top and bottom corners but then they should just lift off or slide out

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

You could use a knife and slide it on the top and pop it off or slide it and to fix the dent you could use a flat screwdriver and push the dent some people use also other equipments. So feel free to try them all!

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

The mesh is somewhat hard. You will have to obviously disassemble the mesh out of the speaker body and then use a rounded tool ( like the handle of a screwdriver ) to push the bump out ( put the screwdriver in a table, place the mesh on top and the n push gently). That worked like a charm !

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

How do I fix the beats pill plus grill and the grill keeps coming out and I need help to force it in back any tools

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Take off the mash grill and find a plastic hammer and light hit it times where the dents are in the mash grill you wanna tap it and wear gloves and wear eye protection goggles

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Gavin sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 20

Tutti i Tempi: 14,660