Hi,
my power/lock button stopped worked today, so I opened the iphone and replaced it, when I boot the screen is black with backlight on and then starts be red but only on left side of the screen. Maybe I damage the connector of the screen?
During the assembly I lost about 2 screws
Questa è una buona domanda?
Rep: 3,6k
10
10
3
Hey Roberto, this usually happens when all of the screws aren't in the correct place for the metal part which is usually found covering the digitizer. Please redo it make sure the screws are in the appropriate place because you can damage the logic board by doing this. A common mistake that can cause this is that the longer screw is put in the incorrect spot or missing screws.
-Let me know how it goes.
-Please accept this answer if it answered the question.
Questa risposta è stata utile?
I think I need to buy a new set of screws from ebay, thanks a lot for the answer, I will update
If this helped in any way please accept this as the answer and thank you.
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 0
Tutti i Tempi: 64
