Salta al contenuto principale

The second generation of the iPad with Wi-Fi, GSM and CDMA models. Some models were refreshed before the iPad 3. Repair is difficult and requires heat and prying. Released on March 11th, 2011. Model numbers: A1395, A1396, and A1397.

729 Domande Visualizza tutte

ghost touch, jumps after digitizer repair

I just replaced the digitizer of my ipad 2. After putting the digitizer back, the ipad keeps jumping as if it is receiving touches. I have tucked the digitizer cable in the gap, still no result.

I saw other posts about similar problem but solution seem to be ipad mini specific. Please help.

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio -1
Aggiungi un commento

1 Risposta

Soluzione Prescelta

Make sure that the cable is plugged into the logic board properly and that the clips on the connectors are closed properly. Other than that it may be a faulty digitizer.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Observer sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 154