Salta al contenuto principale

Quinta generazione dell'iPhone. La riparazione di questo dispositivo è semplice e richiede cacciaviti, strumenti di apertura e pazienza. Nero o bianco, GSM/CDMA / 16, 32, o 64 GB.

2192 Domande Visualizza tutte

Broken resistors after power chip replacement

Hi, I made a big mistake. My iPhone 4s wont charge. The problem is the power ic. So I decided to replace it with my hot air station. It was not easy so I destroyed the faulty chip and some resistors. They broke off.

I solderd the the new power chip successfully but I can't solder the resistors with my hot air station because the wont hold and blow off, even on the lowest air level.

Here is a picture from the problem

Block Image

So how can I fix the broken resistors?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

1 Risposta

Soluzione Prescelta

Iceberg, looks like you ran into a bit of a mess. Interestingly enough, not a single resistor missing ;-) Anyhow the parts are as follows:

L28 2.2UH-1.8A-155MOHM VLS252012 fixed inductor

C605 22UF 6.3V 20& capacitor in a 603 package

C606 22UF 6.3V 20& capacitor in a 603 package

C206 1UF 6.3V 10% capacitor in a 402 package

C85 0.01UF 6.3V 10% capacitor in a 01005 package

C253 10UF 6.3V 20& capacitor in a 402 package

C282 4.7UF 6.3V 20& capacitor in a 402 package

C205 0.1UF 6.3V 10% capacitor in a 201 package

As you probably found out, replacing those is not going to be easy.

Block Image

Questa risposta è stata utile?

Punteggio 2

3 Commenti:

Thank you oldurkey. But where can I buy all this resistors? I can't find any store.

da

I get mine from either digikey.com or Mouser.com

da

Thanks for your help. It seems to be impossible and too expensive for me. :(

da

Aggiungi un commento

Aggiungi la tua risposta

Iceberg sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 257