Salta al contenuto principale

Sesto modello di iPhone Apple, annunciato il 12 settembre 2012. La riparazione si fa in modo simile alle precedenti versioni di iPhone e richiede cacciaviti e strumenti di apertura. Disponibile con tecnologia GSM o CDMA, con 16, 32, o 64 GB, nero o bianco.

2521 Domande Visualizza tutte

no display after replacing screen

I replaced the screen (iFixit replacement screen) following the directions in the video, however when I power on the phone I get a few vertical white lines in the upper right corner? Did I do something wrong?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio -1
Aggiungi un commento

2 Risposte

Risposta Più Utile

Try putting the your old screen back on the iPhone if it works then you have a bad screen. If you are still having problems then you could have damaged the data filters or a small component on the logic board.

Questa risposta è stata utile?

Punteggio 1

1 Commento:

The old screen shattered

da

Aggiungi un commento

Make sure screen connectors are full pressed down

Questa risposta è stata utile?

Punteggio 0

5 Commenti:

It sounds like one of your 3 ribbons is not connected well.

da

I can't seem to get them to snap on tightly

da

Check to make sure none of the pins have bent. You should hear/feel it click in when you apply the pressure. Typically the first connection, the upper left is the problem connection when the symptoms you describe appear.

da

I finally got them to snap on tightly but after it's all put together, when I try to power on, the screen is black. Nothing.

da

Press and hold the Home button and Power button for 10-15 seconds, if it is a software issue it should be resolved. If that doesn't help the it sounds like a bad screen to me.

da

Aggiungi un commento

Aggiungi la tua risposta

webgirllisa sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 73