Aggiusta la tua roba Comunità Store

Repair for speakers, stereos, header units, and CD players for your car or truck.

247 Domande Visualizza tutte

Opzioni

Identifying capacitors marked 10.0 and 100 V on my amplifier?

I have a JL Audio 500_1 V2 Car Audio Amplifier. Try as I might, I cannot find replacement capacitors for my JL Audio 500/1 V2 amp. A large resistor overheated and failed, damaging a few nearby components.

The one component that I cannot find to repair the amp is a large capacitor. There are actually two of them on the PCB.

If anyone can help me locate this capacitor, I would really appreciate it. The back one is damaged badly, and I'd really like to repair the amp and keep using it. Thanks!

http://i.imgur.com/EeZYFMa.png

Block Image

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0

3 Commenti:

Take a picture straight down of the affected area and post it. what is the logic board reference designator for the component?

da

They are C520 and C521. Can't take a good photo at the moment.

da

Did you end up finding them?

da

Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

That looks like a ceramic capacitor. The 10.0 refers to 10 micro farads and the 100V refers to 100 volt breakdown voltage. The J is the tolerance, which is +/-5%. The FMK markings are probably manufacturer codes.

Questa risposta è stata utile?

Sì No
Punteggio 0

1 Commento:

jeromyrew1 take a look at the right side of the capacitor that you described. What do you make out of that?

da

Aggiungi un commento

Aggiungi la tua risposta

Jared sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 423