Salta al contenuto principale

Toy quadcopter with camera, controlled over Wifi by smartphone.

23 Domande Visualizza tutte

Trouble shooting a loose wire on my 2.0

Typical signs of a loose wire any rough movement of the drone and I loose the LEDs on the bottom and get them right back. I did some testing right after take of with hard spins and flips normally causing the problem and for it to crash. Any ideas on where to start or a common problem I can't find would be great.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

1 Risposta

Well I am not an expert on the topic but if the wires connect on the mother board this should help you gain access to the motherboard to see if the cables are connected and the power supply. Maybe you have a short Mother Board Access

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Brian sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 358