Auto Brightness doesn't work after replacing the screen.

Question

iPhone 5

Sesto modello di iPhone Apple, annunciato il 12 settembre 2012. La riparazione si fa in modo simile alle precedenti versioni di iPhone e richiede cacciaviti e strumenti di apertura. Disponibile con tecnologia GSM o CDMA, con 16, 32, o 64 GB, nero o bianco.

2522 Domande Visualizza tutte

giancarlolugo @giancarlolugo

Rep: 59

2

1

Postato: 18 dic 2014

Opzioni

Auto Brightness doesn't work after replacing the screen.

I bought the Screen with everything included. I followed the guide to the letter. Today I noticed that the auto brightness feature doesn't work anymore. I can adjust the brightness manually but not automatically. The front camera works, and I know the sensor works because when I am on a call the screen turns off when close to my ear. Did I do anything wrong during installation or is my replacement part faulty?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 4

Aggiungi un commento

2 Risposte

Soluzione Prescelta

Rany @rany

Rep: 41k

iCenter SARL

15

78

89

Postato: 28 dic 2014

Opzioni

Hi Giancarlo,

You need to disconnect then re-seat the screen assembly.

If this doesn't help, you need to get a new complete front camera flex cable (or even much better: get the one from your old screen), and install it using this guide.

If the above doesn't help, let us know, to explore other causes such as problems with or damage to the logic board during previous manipulation.