Aggiusta la tua roba Comunità Store

Modello metà 2010, A1278 / processore Core Duo 2,4 o 2,66 GHz

794 Domande Visualizza tutte

Opzioni

Why is my screen black after installing a new HD and RAM

I recently followed the steps for installing a new hard drive (the recommended 500gb drive) as well as new RAM (crucial 8gb, 2-4gb). When trying to power up afterwards, I hear my computer turn and it accepted my install disc but the screen remains black. I did unplug the battery during repair but plugged it back in. I did not notice anything break or go wrong while replacing. I appreciate any thoughts.

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 1
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Soluzione Prescelta

Opzioni

Double check the seating of the RAM and the HD cable. 99.044% of the time a reassembly issue is a connector (connection) that turned out to be lose or incomplete. Of course the RAM is 1066 MHz DDR3 SDRAM (PC3-8500).

Have you tried to boot from a different volume? If the HD is not formatted, and there's no OS on it you should at least get a grey screen - to install the OS and format the drive you will need a boot volume of some sort.

Connect an external monitor - if that works normally you have an onboard video chain problem (at lest the CPU/GPU logic board are OK)

If this answer is acceptable please remember to return and mark it accepted.

Questa risposta è stata utile?

Sì No
Punteggio 1

1 Commento:

Thanks for the quick response, I'm not going to have time to mess with it again for a few days but I'll give those things a try.

da

Aggiungi un commento

Aggiungi la tua risposta

John sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 872