RISOLTO: Logic board or power supply malfunction - iMac Intel 21.5" EMC 2428

Logic board or power supply malfunction

I tried to put ssd drive in my imac mid-2011 , and then I tried to turn it on , I heard the sound of the drive and nothing else happens , it just turns off . I turned off the display to get to the logical board. 1 led lights when I press the power button led 2 turns on and shuts off immediately . sometimes led lights 3 lights , I hear the sound , and it breaks not completed . tried to reset smc but failed. tried to include imac when the fans are running at full Power steering . In this mode, imac is behaving strangely , the fans turn on one by one after every reboot .

Questin is translated by Google translate, sorry I'm not English

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio -1

1 Commento

Give us both your native language and the translation sometimes it helps ;-}

7 dic 2014 da Dan

Postato: 7 dic 2014

Opzioni

Did you take the HD out and replaced it with a SSD? Or did you add the SSD (dual drive setup)?

Try disconnecting the SSD cables to see if the system will start then. If you still have the HD in you should boot up, if you took the HD out you should see a blinking question mark in a folder icon.

Questa risposta è stata utile?

Sì No

Punteggio 1

2 Commenti:

I add ssd, not replace.

I try with ssd and try without ssd boot up iMac, but nothing happened...

When I press the power button, hear some noise - CD-ROM, look like try to start but cant

7 dic 2014 da imullika1

Recheck your connections between the system and display. Did you damage or forget a connection?

7 dic 2014 da Dan

Aggiungi un commento

iMac Intel 21.5" EMC 2428

Logic board or power supply malfunction

1 Risposta

Aggiungi la tua risposta