Salta al contenuto principale

Modello A1311 / Metà 2010 / Processore Core i3 da 3,06 e 3,2 GHz o Core i5 da 3,6 GHz

342 Domande Visualizza tutte

No video on the internal screen.

I have a 2010 21.5" iMac that does not work with the internal LCD. I have replaced the logic board, display, display cable and the LED driver board. the internal display still will not work. Could the graphics card be bad and still work with an external display? Could it be the power supply? Everything else works on it except the internal display, no backlighting or anything. Thank you

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

1 Risposta

Risposta Più Utile

NO if the CPU/VGC is bad there is no video externally. In fact one of the DIY test to see if a blank display problem is GPU/VGC or logic board is to use an external monitor.

Cables, connectors, or the display itself could cause an internal display problem. Seeing as you've replaced everything else it's narrowing down to the cables (connections) or the display.

Go over your video/data cable connections again. Many times people come here sure that they've reassembled their project correctly but on a second examination have found an improper, lose or damaged connector.

IF all the connectors are right examine the cables for tension (that could pull a connector lose at reassembly - do not reroute cables from original paths- if they were secured with tape or sticky pads that was done for a reason, replace them) or cuts/nicks. If those possibilities are removed all you're left with is a damaged display.

If this answer is acceptable please remember to return and mark it accepted.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

dtjay7 sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 306