Aggiusta la tua roba Comunità Store

Apple's 2012 first-generation 7.9-inch iPad mini, with 16, 32, or 64 GB of storage and an A5 processor.

630 Domande Visualizza tutte

Opzioni

Smartcover activating from back of device after repair

I am having an issue that has now showed up on both iPad Air and iPad Mini.

After digitizer replacement - it seems the magnetic sensor are TOO sensitive. This means that when opening your smartcover - thereby pushing it to the back of the device - it now activates On/Off functionality.

So far I have only seen this with Air and Mini but it's getting more frequent. Any input here is appreciated.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 1

2 Commenti:

Hi did you end up managing to fix this problem? Im having the same issue :(

da

Unfortunately I did not fix it with that digitizer. I ordered another digitizer from another company and the issue was gone.

da

Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

Hi Mikkel Rasmussen,

I have finally encountered one of these faults in the wild. My thoughts immediately went to the magnetic wake sensor.

Essentially your intuition is right on the money: replacing the sensor is the solution. Alternatively fitting a complete glass and digitizer assembly that comes with the magnetic wake sensor is what I would advise for those who want a time effective solution. Though replacing the sensor itself is probably the most profitable solution.

I hope this helps :)

Questa risposta è stata utile?

Sì No
Punteggio 0

1 Commento:

Where is the sensor located?

da

Aggiungi un commento

Aggiungi la tua risposta

Mikkel Rasmussen sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 224