Power Button Doesn't Click after Housing Replacement

Question

iPhone 3GS

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1502 Domande Visualizza tutte

Jacob @jacob75800

Rep: 11

1

Postato: 19 giu 2010

Opzioni

Power Button Doesn't Click after Housing Replacement

I replaced the back housing on my 3GS, but I can seem to keep the power button from going flush with the housing. It seems to work okay, but doesn't "click" like it used to. Any suggestions?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

Aggiungi un commento

3 Risposte

waatahipango @waatahipango Rep: 37 1 · Answer 1 · 2011-09-04T08:30:25-07:00

Risposta Più Utile

waatahipango @waatahipango

Rep: 37

1

Postato: 4 set 2011

Opzioni

I know this an old thread, but I thought I'd put my solution up for anyone reading this in the future: I ordered a new button, and when I looked compared it with the old button, it was missing a little plastic rectangle on the back. I took it off the old button (it just peeled off), and I put it on the back of the new button. When I screwed it all back together, it clicked, when without this plastic rectangle, it didn't. Hope it helps.

Questa risposta è stata utile?

Sì No

Punteggio 3

Aggiungi un commento