Rep: 25
2
1
My cat knocked my 3DS XL off of a dresser while it was charging, and the piece inside of the charging port is now bent. The charger can go in if I wiggle it a little bit, and the system is getting a charge, but the more i use the system, the more I notice that the charger easily comes out. It used to firmly stay it. How do I fix this?
Questa è una buona domanda?
Rep: 71
1
1
Best bet would be replace the charging port, this requires disassembling the device and desoldering the old port, then soldering a new one, it's not as hard as people think as long as you have basic soldering skills. :]
Questa risposta è stata utile?
Could you link me to a guide if possible? I've never opened a 3DS (other than to replace battery.) Also a link to where I can buy a charging port. I can't seem to find one.
The charging plug.
http://www.amazon.com/Socket-Connector-C...
And for a guide just search on youtube. :D
Heck, you don't even need basic soldering skills. Fixing one of these was the first thing I had ever soldered.
Can’t I just bend it back into my place I have the same issue but don’t want to risk breaking the device
Questa risposta è stata utile?
Ultime 24 Ore: 1
Ultimi 7 Giorni: 6
Ultimi 30 Giorni: 26
Tutti i Tempi: 8,479
