External screen works. Keyboard backlight OK. Can't I jumper power to the LCD backlight to turn on the LEDs? I don't need to increase, decrease backlight, just turn them on and get it to work. I would need the LCVD connector pinouts. Anyone have those?
Questa è una buona domanda?
Rep: 781,5k
1,1k
893
2,3k
Dean Leonard, bad idea. There is more to it than just to place a jumper on the display adapter. You will have to check first if you even get power to it. I suggest to check the backlight fuse and the LED driver, which seems to be a pretty common fault. The other thing you need to be aware of, is that it might be your LCD panel, in which case you just do not have a working light.
Questa risposta è stata utile?
Rep: 7,6k
13
22
11
Yes absolutely jumper power to the backlight output before checking if there is a short to ground, before checking the BKL_EN line of U7701 to see if the chip is even being told to turn on. I am CONFIDENT that jumping SYSTEM MAIN POWER to OUTPUT is FINE before even checking if it is shorted to ground by a dead component, what could
POSSIBLY
GO
WRONG????
If my sarcasm didn't come through properly; THIS IS A BAD IDEA!!!
This is a year old post so I doubt I will hear from you specifically, just posting this sinc eit is on page 1 of answers right now and is a REALLY BAD IDEA to anyone reading.
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 0
Tutti i Tempi: 306
