Rep: 1
1
2
820-2936-b logic board fuse
i have 820-2936-b logic board, no back light, need to know fuse location, also does not turn on with battery only, even with fully charge battery, need to connect with magsafe, is that for another fuse
Questa è una buona domanda?
Rep: 479,3k
35
329
971
It sounds like you have two issues here:
You state the system does run working from the power adapter. So do you see the faint image of the desktop on the display? Use a flashlight to shine tough the lids Apple logo (a poor mans backlight), are you able to see the desktop icons? If you are then you know there is an issue is within the backlight circuit. Which could be a fuse, bad cable, WLED or inverter depending on the model.
Your second issue where your system won't work with the battery alone tells me you have a power control issue which often comes down to a burn't FET or comparator in the charging circuit.
But without knowing the exact model we really can't answer your question.
The 820-2936-b logic board is not from a MacBook but a MacBook Pro.
Questa risposta è stata utile?
yes 2011 macbook pro a1278 i5, 13"
yes i have two compactly different issue
1. no back light, with a flash light i can see the image , with external monitor it works fine , so i need to know the fuse, or the reason, already cheak with a different lcd from still no backlit so it must be logic board,
2. with out magsafe it doesnot turn on, but battery receive charge . it was liquid spilled, i already cleanned it professionally. im assuming some fuse or capacitor also burnt out
also i know some component level repair with hot air solder, just need to know which part to change and where to chk, thanks
Did you fully remove the logic board when you cleaned it? On the other side there are more logic which may need cleaning. To fix the display OT's answer should do it.
ya i have computer repair store here in winnipeg, i did professional cleanning, took out logicboard, i did fix lot of logic board just cleanning too, and have some experience on component level repair too....
Rep: 782,2k
1,1k
893
2,3k
sabrinachristal, the fuse is reference designator F9700 and is a 2AMP-32V in a 0402 package. Hope this helps, good luck.
Reference designator U9701 is the LP8550 backlight driver.
Questa risposta è stata utile?
OT - Your the Man! ;-}
i checked this fuse and both side had 12v, !!
i think fuse is good, wled driver may be bad, which one is that and what is the part number
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 0
Tutti i Tempi: 915
Can you give us the last four digits of your serial number to we can correctly identify which model you have.
da Dan
2011 macbook pro 13" i5, 2.3ghz, logic board no is 820-2936-b
da sabrinachristal
MacBook Pro (13-inch, Late 2011)
Serial Number: C02GV3WTDV16
da sabrinachristal
logic board serial : c021415041fdtn5al
da sabrinachristal