Aggiusta la tua roba Comunità Store

Modello A1312 / metà 2011 / Processore Core i5 da 2,7 e 3,1 GHz o Core i7 da 3,4 GHz, ID iMac12,2

708 Domande Visualizza tutte

Opzioni

Plugged display cable backwards after cleaning, screen won't turn on

Hey guys,

I was cleaning my iMac and took the screen off to air out all the dust. When putting it back together I plugged the display power cable backwards. Now screen won't turn on and there's burn marks below. I can hear the computer start and the boot sound plays. Screen stays off all the time. Any hope to get it back working?

Images: http://imgur.com/a/MwhEP

Block Image

Block Image

EDIT: Based on this thread Damaged display power header whilst replacing hard disk drive it's the ferrite chip that is blown. Is this computer repairable?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 1
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Soluzione Prescelta

Opzioni

Tommy. it is indeed the L9000 250 Ohm Filter in what looks like a 0805 package (measure to confirm), that was destroyed. It is vital to the internal display power circuity. Yes it is repairable, but you will have to know how to solder SMD components. The component itself is readily available at multiple places like Digikey.com and others. Hope this helps, good luck.

Questa risposta è stata utile?

Sì No
Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

Tommy sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 349