black display after reparation of the power button

Question

iPhone 4S

Quinta generazione dell'iPhone. La riparazione di questo dispositivo è semplice e richiede cacciaviti, strumenti di apertura e pazienza. Nero o bianco, GSM/CDMA / 16, 32, o 64 GB.

2193 Domande Visualizza tutte

Domanda Chiusa

Martin @martin56655

Rep: 1

Postato: 21 giu 2014

Opzioni

black display after reparation of the power button

Hi, I had a problem with the powerbutton on my iPhone 4S. I bought a new flex calble for the power button and followed your instructions. Everything was ok but when I wanted to start the iPhone I only got a black display. The button works - I feel the "klick" - and there is power on the battery. You can feel the engine start but I have a black display.

Are there any typical mistakes which can occour by following the guide and are there any solutions?

With kind regards

Martin

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

Aggiungi un commento

2 Risposte

con @con82159 Rep: 37,6k IRepair iphones 22 51 42 · Answer 1 · 2014-06-21T18:07:26-07:00

con @con82159

Rep: 37,6k

IRepair iphones

22

51

42

Postato: 21 giu 2014

Opzioni

Just make sure the connectors are seeded correctly.

As so plug into computer and make sure ITunes reconises it .

If it reconises it and still black screen and connectors ok then it's a damaged display

Questa risposta è stata utile?

Sì No

Punteggio 0

1 Commento:

well my display was absolutely fine before I did the repair. My itunes recognieses the iphone without any problems. The connectors are on the right position. is it possible that they are polluted? And how could I solve it? Tanks in advance!

22 giu 2014 da Martin

Aggiungi un commento

Brad @brad80191 Rep: 24,4k 35 16 30 · Answer 2 · 2014-06-21T18:38:52-07:00

Brad @brad80191

Rep: 24,4k

35

16

30

Postato: 21 giu 2014

Opzioni

Try Reset, hold both home and power buttons for about 10 seconds until the iPhone begins to restart itself.

As con said, make sure the LCD Display flex is perfectly connected to logic board.

Questa risposta è stata utile?

Sì No

Punteggio 0

1 Commento:

well the screen becomes lighter at the edges when I press the home button but there is no nromal screen. Is it possible that the connectors are polluted?

22 giu 2014 da Martin

Aggiungi un commento