Logic Board Display Connector - Water Damage - Missing Pin
Hi,
so i have an iphone 5 that was dropped into water. the phone itself does work fine. only the display/screen connector sems to be broken cause the screen stays black when the phone is turned on. however the touch works cause you can hear keyboard clicks an vibration works to - so the digitizer/touch connector should be ok
- so it sems to be all ok except the screen connector. - here is a closeup pic from the in my thoughts damaged connector: Damaged Display Connector - Picture
so my question is if there is a way to fix the connector?
Thanks Peter. :)
Questa è una buona domanda?