Aggiusta la tua roba Comunità Store

Lanciato nell'aprile 2010 / processore Core i5 2,4 o 2,53 GHz o Core i7 2,66 GHz

591 Domande Visualizza tutte
Domanda Chiusa

Opzioni

How can the fans be disassembled without damage?

I have a fan that's very audibly grumbling while at idle speeds. I've opened the case and cleaned the fan blades and casings, with no result. I suspect there's dust/dirt in the actual bearings inside of the fan.

I've attempted to gently (but very forcefully) pry the fan piece with the blades away from its axle, to no avail. I fear that using more force would break it, but I can't tell how it's connected to know for sure.

I'd really like to fix this problem without dropping $50 on a replacement fan, if all I need is a cleaning.

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

2 Risposte

Filtra per:
Più utili Più recenti Più Vecchio
Soluzione Prescelta

Opzioni

Sadly, these fan units are not really designed to be taken apart. While its fun to do on a junker, if you want to reuse it it just won't do. Best to replace.

Questa risposta è stata utile?

Sì No
Punteggio 2
Aggiungi un commento

Opzioni

take some compressed air and some elektronic cleaner.

wd40 could also work. cheaper and easier is to buy a new fan.

Questa risposta è stata utile?

Sì No
Punteggio 0

2 Commenti:

Fairly confident on how to clean it -- it's how to get the pieces of the fan to physically separate that I'm having a hard time with :). I feel like if I pry against the rotor any harder, something's going to snap.

da

First I won't use any oil (including WD40) as it will attract dust which will clog the bearing and the blades.

da

Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 79