iPhone 5 Logic board repair needed
Hello guys,
I had a customer walking in my store today. She brought a iPhone 5 for a cracked display repair to a little repair shop around my corner. However, after they where finished with her iPhone 5 it doesn't respond to anything. No power at all, not even iTunes. So I thought its a logic board problem. I added a few pictures. The connector below the dock connector is damaged. Anyone knows what this is? And is this why there is no power? I found this picture on the internet: http://www.cyberdocllc.us/wp-content/upl... The pyramid coil is removed from this logic board, and there is damage below it as shown in my picture: http://i61.tinypic.com/qns7id.jpg
Also the EMC shield are removed by this repair shop. I am not sure, but it looks like the remaining EMC shields are wielded together so i can't take them apart.
http://i58.tinypic.com/33xept5.jpg
Any advice how to get the phone working again?
Questa è una buona domanda?
1 Commento
@con
A new battery doesnt work. The phone also doesnt boot when i connect it to the power line with the connector disconnected. The shop takes no responsibility whatsoever, thats why the lady came to me.
@Jonathan
Thanks for the tip, but i am not really into soldering, let alone on micro level. I am just wondering if this damage is related to the no power.
- UPDATE
When i connect the iPhone to my mac i sais, disconnector the USB cable that uses too much power. So its definitely sucking up power, but somewhere in the circuit it goes wrong.
da Sven Arits