Aggiusta la tua roba Comunità Store

Sesto modello di iPhone Apple, annunciato il 12 settembre 2012. La riparazione si fa in modo simile alle precedenti versioni di iPhone e richiede cacciaviti e strumenti di apertura. Disponibile con tecnologia GSM o CDMA, con 16, 32, o 64 GB, nero o bianco.

2522 Domande Visualizza tutte

Opzioni

I got the nand error, what precautions should I be taking?

Hello,

I was recently replacing a customers screen when I was faced with the nand error! After much frustration I did some research and disconnected the 3rd flex cable for the proximty sensor and front facing camera. By doing this, the phone successfully booted up. Sequentially I ordered a replacement flex cable, however Im wondering what precautions I should be taking when installing the flex. I usually transfer this flex cable over very carefully from the old screen to the new one, so this error was a surprise to me.

I also noticed that the screen replacement I received has an extremely loose front facing camera bezel, could this have caused and error?

Theres also a black rubber square like (bezel maybe) that comes out from under the flex, where should that be placed?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio -1
1 Commento

UPDATE:

Just got the replacement part in for the proximity sensor and front facing camera, installation went well and phone booted up properly

da

Aggiungi un commento

3 Risposte

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

Seen this before you damaged the ribbon cable removing it - it is very fragile and you most likely caused the damage when removing it from the old screen. You need to heat it to soften the glue and not just pull at it to remove it. Same with the home button - heat up the flex to soften the glue beforehand.

Also most replacement screens dont come with the front camera bezel plastic and it shouldn't be loose - you usually transfer it from the old one and glue it in place on the new one.

Questa risposta è stata utile?

Sì No
Punteggio 2
Aggiungi un commento

Opzioni

Hi there I have never came across this error but you must have damaged it in someway maybe you tilted the screen to high when taking the emi sheild off and damaged it hard to say

Questa risposta è stata utile?

Sì No
Punteggio 0

2 Commenti:

No the camera bezal loose would not affect this and the little black peice are you referring to the spacer that is used and has a hole init?

da

Yea thats what Im referring to

da

Aggiungi un commento

Opzioni

That spacer is just a spacer. Do not screw the long screw in so tight that the retaining plate bends, and then everything should function fine without it.

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

iMatt sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 190