Salta al contenuto principale

CDMA version of the fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. 16 or 32 GB / Model A1349 / CDMA compatibility.

303 Domande Visualizza tutte

Replaced LCD Now have Black Screen

I was repairing the LCD on a Iphone 4 CDMA and unplugged the LCD connector before the battery. I hooked it back up and the screen was black. The phone was on you could see the back light and you could hear it. I tried two other screens and the same except the last one the screen was a little gray. Did I do permanent damage to the logic board? I have tried the reset and it did not work.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio -1
Aggiungi un commento

2 Risposte

The iPhone is not so vulnerable.

You can try to unplug and plug the connector of battery.

Questa risposta è stata utile?

Punteggio 0

Commenti:

yes like stated installed two more LCDs and none of them worked. I have see on repair videos a warning about unplugging the LCD first could cause damage want to know if this is true what damage has been done.

da

Aggiungi un commento

Is your iPhone iOS 5 If so then you will need to update to iOS 7 and the screen will work..

New screens don't work on iOS 5

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Kage sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 144