Aggiusta la tua roba Comunità Store

Quinta generazione dell'iPhone. La riparazione di questo dispositivo è semplice e richiede cacciaviti, strumenti di apertura e pazienza. Nero o bianco, GSM/CDMA / 16, 32, o 64 GB.

2193 Domande Visualizza tutte

Opzioni

new LCD not responding

This a has probably been touched on before, but here I go. I replaced the LCD and digitizer on an iPhone 4s, the original screen worked fine but had a small crack. When the new screen was attached I noticed that it would not display anything. I tried to pinpoint the issue by reconnecting the old screen to see if it was due to the replacement being faulty.. The old screen still worked fine. I tried to restore the iPhone to combat any software issues that may be causing the problem. Not only did the new screen still not work, but now the old screen won't even display anything !! Its running on ios 7.1 now after restoring previous was running on 7.0

Someone please help !!

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio -1
Aggiungi un commento

2 Risposte

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

The old screen still worked fine. = the new lcd assembly was defective. this is totally common.

now the old screen won't even display = the iPhone doesn't like you to plug and unplug the screen when the battery is connected. it sounds like maybe you were doing a lot of plugging/unplugging in which case it is likely that you may have damaged the backlight filter.

Either way, return your screen and order a new one and then update here.

Here is a link that may be helpful for checking backlight filter continuity. You would use your multimeter set on 'continuity testing' to determine if there was continuity across these filters in red/orange on the picture

|iphone 4s backlight troubleshooting]

Questa risposta è stata utile?

Sì No
Punteggio 0

5 Commenti:

Is the backlight filter is on the LCD assembly itself or on the device

da

The backlight filter is on the logic board

da

Is there any way to be absolutely sure its the backlight filter (if that's the case ?

da

And can I use the backlight filter from an iPhone 4 logic board ?

I appreciate all of the help

da

You can check the backlight filter for continuity if no beep--thats the problem

da

Aggiungi un commento

Opzioni

how do i check for continuity ?

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

frank rijo sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 162