Rep: 21
3
10
The computer will simply turn on, the LED light shining and the initial screen flicker.
I noticed that the vast majority of the water damage is around the RAM.
What do I need to do to get this thing running again?
Questa è una buona domanda?
Rep: 8k
41
26
10
Try holding down Option and see what shows up, if anything.
Try putting the install DVD into the MacBook and as you start up, press and hold D
Is the LED light steady? or does it blink a certain amount of times?
Questa risposta è stata utile?
Rep: 13,3k
45
21
11
Remove the battery, power chord and topcase and let it dry. Remove the RAM and harddrive. Clean any suspected area with isopropyl alcohol. Don't use a blow dryer! Put everything back together and start it from the system disk - good luck.
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 0
Tutti i Tempi: 1,194
1 Commento
It has been cleaned with alcohol and no blow dryers. The LED light is steady. I'll do the other suggestions and update in a bit.
da Michael Swenson