Salta al contenuto principale

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 16 or 32 GB capacity / black or white plastic back.

1961 Domande Visualizza tutte

screen is blank after replacing battery

Hello,

Replaced an old battery with a brand new one. Same voltage and current. With the new battery, the screen is blank. I can log on, play music, talk to the Voice Control, access the harddrive via iTunes, ..., just a blank screen. Any idea? I'll attach a picture.

Block Image

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

Kit di riparazione batterie iPhone

Solo $29.99

Buy Now

Kit di riparazione batterie iPhone

Solo $29.99

Buy Now

1 Risposta

Hi, have you tried pressing the home and power button together for about 10 secs and then pressing the power button to power it up again? If that still does not work, check if the cable is seated properly. Still no luck, then u might have damaged the flex cable when u installed the screen. Write back on what u did. Good luck.

Questa risposta è stata utile?

Punteggio 0

Commenti:

Yes, thank you. Long story short: this 3GS I gave to my 9 yo son when I upgraded to the 4G last year; he uses it as a sort of "ipod Touch." Anyway, earlier last year, he accidentally spilled water on the phone, which shorted out the power button (or at least made it inop) so I couldn't do as you suggested. However, we were able to reboot the phone via computer. Had to restore it to an earlier saved setting, but it works fine now. Guess I just had to power down the phone, which I was unable to do - normally. Thanks again for the suggestion, hope this helps someone in a similar situation!. Adam

da

Aggiungi un commento

Aggiungi la tua risposta

atkach sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 39