Opzioni

new graphics card booting windows HELP

so i brought a hp hd2600 mobility off of eBay, then i replaced the existing hd2400 with that. problems below.

it can boot OSX, but i can ONLY operate the computer using splashtop(display streaming to my iPad). OSX does not recognize the new card and graphics are laggy. internal display and dvi port have no signal.

when i set startup disk to windows, it does not work period. not even splashtop. (black screen all the way)

the graphics card flashing software(zues) doesn't flash under OSX because it did not detect any graphics card. so the only way to flash this card is under windows which the mac does not boot.

any ideas?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 1

1 Commento

I assume these pics are from the original graphics board, which clearly is burnt.

17 nov 2013 da Dan

Aggiungi un commento

Postato: 17 nov 2013

Opzioni

You have a very tricked out system here

At this point I think you'll need to get a 2400 XT (new or used) to make sure the system is able to even see it.

Replacing is for the better 2600 Pro should be doable (Others have done it). It's likely the current OS on your HD is missing the driver for it. Do you have the recovery CD/DVD and an optical drive which you can boot the system up with?

Questa risposta è stata utile?

Sì No

Punteggio 2

9 Commenti:

i still have the hd2400, the current OS you are talking about is OSX or windows? and what driver are you mentioning?

17 nov 2013 da Calvin

OS-X needs to work first, then you can try getting BootCamp or virtual machine (VM) {i.e. VMWare} to work afterwards. The pics looked like the card was burn't is it still working? If so you'll need to put it back.

17 nov 2013 da Dan

still works, put the card back and then what?

17 nov 2013 da Calvin

Still works? So running under either Mac OS-X or Windows via BootCamp are OK?

17 nov 2013 da Dan

yes, every thing works with hd2400 it is just hd2600 is not working

17 nov 2013 da Calvin

Mostra altri 4 commenti

Aggiungi un commento

iMac Intel 20" EMC 2133 and 2210

new graphics card booting windows HELP

1 Risposta

Aggiungi la tua risposta