Why wiill it not boot after new digitizer fitted?

Question

iPad 4 Wi-Fi

Fourth generation of iPad, released November 2, 2012, available in 16, 32, or 64 GB models. Model Number A1458

218 Domande Visualizza tutte

Domanda Chiusa

Dan @dan55014

Rep: 13

1

Postato: 5 ott 2013

Opzioni

Why wiill it not boot after new digitizer fitted?

I have just replaced a digitizer front screen on a friends iPad 4.

It was working fine before I did this, the screen was just cracked.

Now I get [NAND] find flash media and keepout 601 physical block off set .... there are about 5 to 6 lines all starting with NAND, The Apple logo is in the centre of the screen.

The only way I can turn the machine off is holding down the home button and sleep bottom together.

Help! Many thanks Dan

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

1 Commento

check my answer below

27 gen 2014 da MASTA KAHUNA

Aggiungi un commento

3 Risposte

Gemma @gemma63265 Rep: 13 1 1 · Answer 1 · 2013-10-06T06:46:37-07:00

Risposta Più Utile

Gemma @gemma63265

Rep: 13

1

Postato: 6 ott 2013

Opzioni

we have the same problems please help!

Questa risposta è stata utile?

Sì No

Punteggio 1

1 Commento:

looook below!!!!!!

27 gen 2014 da MASTA KAHUNA

Aggiungi un commento

MASTA KAHUNA @mastakahuna Rep: 59 5 4 · Answer 2 · 2014-01-27T16:24:12-07:00

MASTA KAHUNA @mastakahuna

Rep: 59

5

4

Postato: 27 gen 2014

Opzioni

you want an answer ,??? no prob!! check the 3rd connector of camera disconnect it ,remove battery ,reassemble it again W/O THE CAMERA CONNECTOR IN !! and try

if still issue remains ---try a new lcd full set! and if its still with the nand error of kernel panic !!!

check the------------->>>> u2 chip!!!!!!!!!! and cover the whole board with tape so that there wont be any connection to the back lcd bezzel aluminium cover!!

http://i00.i.aliimg.com/img/pb/465/292/6...

Questa risposta è stata utile?

Sì No

Punteggio 0

Aggiungi un commento