Aggiusta la tua roba Comunità Store

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

220 Domande Visualizza tutte
Domanda Chiusa

Opzioni

iPad Mini can't get past apple logo after screen repair

I have repaired a few ipad minis and never had problems. This one though, is killing me.

I removed old digitizer, took out old lcd, unplugged battery, but new digitizer back in, put lcd back in, plugged battery back in and went to power up to test.

Apple logo, awesome! but then after several seconds on the logo, it fades out pretty quick and reboots the ipad and does it all over again.

Ive tried other digitizers, i've double checked everything I could, tried restore (error 9), etc. Made sure no debris anywhere inside causing a short.

Any ideas?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0

1 Commento:

Tried a new battery just to see.. same result :(

da

Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

I doubt that the digitizer is what is causing the issue. It's likely something else.

The first thing I would do to troubleshoot:

Restore the iPad in iTunes (hopefully you have a backup) you may need to place the iPad in DFU mode to get the restore to work.

Let me know how this goes!

Questa risposta è stata utile?

Sì No
Punteggio 0

1 Commento:

Already tried restores as mentioned in both regular and DFU modes, still no luck. Same "fade out" apple image right as it appears to be copying over the files

da

Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 287