The Sony Ericsson 760a features Bluetooth, USB, GPS and support for GSM, GPRS, EDGE and 3G networks.

1 Domande Visualizza tutte

How do you repair the keypad numbers that won't function?

My wife dropped her phone in a bowl of water. It was quickly removed and dried as best possible. Now, the number 9 key and her address book key don't work. Is this fixable?

Risposto! View the answer Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

Sfoglia il Nostro Negozio

2 Risposte

Soluzione Prescelta

I would say - maybe

water damages are sometimes bad - even if the look tiny.

the w760 has 2 ribbon cable keypads.

the contacts of the non working keys can be burned - in this case a repair can be tough - but with conductive silver would a repair be possible.

on the other side - the keypads are sold on ebay - but those parts can cost a fortune (up to 50$ together, the complete phone cost 99$)

so, fixing it would be the best way.

here are some youtube videos (take a look at the video list)

the keypads are looking similar to this

clean the keypads carefully with rubbing alcohol and a soft cloth

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

I once went swimming and realized afterwards that I had my Motorola L2 phone in my pocket. I tried turning it on afterwards and it appeared to be completely dead. Here is what worked for me:

1) Remove the battery

2) Place the phone (or other device) in a sunny window where it will get a lot of direct sunlight, with the display up and the battery cover removed so the water vapor can get out

3) Let it sit for a few days until it has dried out completely and try it again.

After a couple of days I re-inserted the battery and tried it again and the phone worked fine. I have used this phone for several years since this happened without any problems. As a rule, water (if it is relatively clean) does not do catastrophic damage to electronics. The main things to do are to remove the power and *gently* dry it out completely.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Brett Barker sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 2,613