Rep: 285
6
11
Hello,
I replaced the sensor/power cable.
Power button works perfect but no sensor.
I tested with other cables, but no succes unfortunately.
Who can help me?
What can i do?
Questa è una buona domanda?
Rep: 103
2
1
in my experience if u put a small piece of scotch tape covered in sharpie over the sensors before installing the new screen works for me. its not an issue with cables or anything its because its a different tint of paint on the two little holes.
Questa risposta è stata utile?
Rep: 5,5k
20
17
12
you may have a logic board failure. Check the connector. If it is damaged, you need to replace the logic board unless you are talented in micro soldering.
Questa risposta è stata utile?
There is no problem with the logic board.
Before the replacement worked perfect and now the sensor doest't work.
I have experience with the iPhone 4 sensor problem. On the iPhone 4 is a sensor sticker the sullution.
Maybe on the 4s to?
Rep: 5,5k
20
17
12
If multiple cables do not work, it must be a logic board issue.
Questa risposta è stata utile?
Good news.
I just put my logic board in another iPhone 4s and the sensor works then.
There must be wrong with the cable dan.
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 0
Tutti i Tempi: 157
