Salta al contenuto principale

Released in 2007, identified by model number WD-57734.

16 Domande Visualizza tutte

Projection shows black & white flakes?

Projection image shows flakes when viewing. Flakes increase every on/off cycle. Almost unviewable. Any suggestions?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio -1
2 Commenti

Thank you, very helpful. Once i gained acces from side panel only thig left was projection. A relief to know

da

You are welcome and hopefully you will get it fixed.

da

Aggiungi un commento

1 Risposta

Soluzione Prescelta

PWILLIAMS, sounds like your DLP chip is failing. It literally has thousands of tiny mirrors on it and each "flake " you see is a mirror failing. This is a known problem for this model and Mitsubishi had at one time a program, to cover 1/2 half of the repair cost. You may want to contact them on here. If not, then use this guide to replace this chip. Hope this helps, good luck.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

PWILLIAMS sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 465