I bought the home button ribbon cable to replace it on My itouch 4th gen. I followed the directions exactly like I was supposed to but when I turned it back on the home button sill didn't work. It clicks like it's supposed to but it is not responding. What did I do wrong?
Questa è una buona domanda?
Rep: 536
9
2
1
Maybe you've broken the ribbon cable connector, it is very VERY frail.
But before you change it, it was working sometimes or not?
Questa risposta è stata utile?
It didn't work at all. The silver button on the old ribbon cable was completely gone. It felt as if it was jammed.
Sorry but i noticed only now that you are repairing an ipod, and not an iphone.
You may have done 2 mistake.
1-You haven't fitted fine the ribbon on the steel mid plane, or you haven't placed fine the mid plant on the ipod.
2-You have broken or you have dirtied the contact.
Maybe you could also have fitted a broken parts but it is very unsual. Unmount the device, try the button with a tester and when reassembling take more attention to put the ribbon in correct position, and clean the contact between the ribbon cable and the logic board.
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 0
Tutti i Tempi: 85
